Home > Products > USB-C > USB-C SSD Enclosure

  • UD0003 USB-C 3.1 SSD Enclosure support NVME 10G and Sata 5G
  • UD0003 USB-C 3.1 SSD Enclosure support NVME 10G and Sata 5G
  • UD0003 USB-C 3.1 SSD Enclosure support NVME 10G and Sata 5G
  • UD0003 USB-C 3.1 SSD Enclosure support NVME 10G and Sata 5G

UD0003 USB-C 3.1 SSD Enclosure support NVME 10G and Sata 5G

UD0003 USB-C 3.1 SSD Enclosure support NVME 10G and Sata 5G

Share
Product Description

Product Description

UD0003 USB-C 3.1 SSD Enclosure support NVME 10G and Sata 5G


This pocket-sized  enclosure is a DIY kit for assembling M.2 NVMe SSD(PCIE-based), and the speed is USB3.1 Gen2 10Gbps, which is specially designed for mobility, with an ultra-portable design that fits easily into your laptop bag.  And support Sata 5Gbps.

1. Ultrahigh Speed

USB 3.1 Gen2 Port supports data transmission speeds of up to 10Gbps for steady and efficient data transfer. 

Backward compatible with USB 3.1 Gen1 and USB 3.0 at respective speed limits. Provides transfer speeds of more than 900MB/s, that's around 9x faster than taditional external HDDs. Transfer and backup large-sized data files and 4K videos in seconds.

2. Never slow down

    It will keep high speed even if after several hours of continuous work.

3. Auto Sleep ( 5 mins)

    For energy-saving & reducing power consumption & heat dissipation & prolonging SSD life.

4. Low Temperature

    Master IC works with lower temperature.

5. Easy Setup

    Hot-swappable; Fully bus powered; Plug and Play; No Driver required.

6. Broad Applicability

    It works for mobile, tablets, laptops, desktop computers and other hosts that are equipped with USB Type-C and Thunderbolt 3 ports.

7. Special Applicability

    Only applicable for M-Key or B+M Key SSD 

    (PCIE-based).  Applicable to 4 sizes of SSD: 80mm (2280), 60mm (2260), 42mm (2242) and 30mm (2230).

8. System Compatibility

    Support Windows 7 or above, Mac OS 10/10.5 or above, Linux, Android, iOS

Warm Reminder:

1. Only support  M-Key or B+M Key M.2 SSD (

2. To realize 10Gbps data transmission rate, the USB 3.1 interface on source devise should be USB 3.1 Gen 2.  For some sources comes with USB 3.1 Gen1, then the max speed is 5Gbps.

3. It is normal that the case heats up since the high-speed NVMe M.2 drives generate a lot of heat while working.

4. Most of the new SSD need to be initialized, partitioned and formatted.



M.2 NVME Enclousre, NVME Enclousre, M.2 SATA Enclousre, SATA Enclousre,SSD Enclosure, usb-c ssd, usb c ssd, usb c ssd enclosure, usb-c ssd enclosure, USB-C M.2 SATA Enclosure, USB-C M.2 NVME Enclosure, USB-C Enclosure, USB-C NVME Enclosure, USB-C NVME, USB C M.2 SATA Enclosure, USB C M.2 NVME Enclosure, USB C Enclosure, USB C NVME Enclosure, USB C NVME,type-C M.2 SATA Enclosure, type-C M.2 NVME Enclosure, type-C Enclosure, type-C NVME Enclosure, type-C NVME, type C M.2 SATA Enclosure, type C M.2 NVME Enclosure, type C Enclosure, type C NVME Enclosure, type C NVME,NVME PCIE, NVME M.2


Delete
  • wechat

    +8613631674993: +8613631674993

Chat with Us